Product Details

Uses:

To minimise permeability and increase the waterproofing properties of concrete, plaster and cement sand mortars for critical applications like roof slabs, screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.

Feature and Benefits:

• Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
• Corrosion resistant: Meets the requirements of Japanese code JIS Z1535 (modified) first of kinds in the integral water proofing range.
• High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
• Cohesive Mix : Improves workability and cohesiveness of the concrete.
• Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Description:

Conplast WL Xtra is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more efficient compared to traditional powder and conventional integral waterproofing compounds as its use results in two fold improvement of concrete or mortar.

Properties:

Application Instructions

• Add cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1 minutes.
• Start addition of 75–80% mixing water & mix for 2-3 minutes.
• Fosroc Conplast WL Xtra is added as per the recom- mended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
• Place the concrete or apply plaster, as needed.
• Cure the applied mortar or concrete as per good construction practices or use Fosroc Concure curing compounds.

Dosage : The Optimum dosage is 200ml for 50kg of cement.. Site trials shall be carried out to validate the optimum dosage.Note: Mix using Conplast WL Xtra will require much less water than normal mix for the same workability. Water reduction may be as much as 10% or more. If the moisture content of the sand or aggregate changes i.e., it becomes wetter or dryer, then the amount of water used must be reduced or increased to give the original workability.

DO’s and DOnt’s :

•  Do not add Fosroc Conplast WL Xtra directly to dry cement & aggregate mix.
•  Maintain water-cement ratio as low as possible.
•  Do not increase the dosage of Conplast WL Xtra than the recommendation.

Fire:

Conplast WL Xtra is non-flammable.

Estimating Packaging

Conplast WL Xtra is supplied in 200ml, 1, 5, 10, 20, 50, and 200 liter containers.

Storage

Conplast WL Xtra has a minimum shelf life of 24 months, if kept in a dry store in unopened containers, temperature below 50oC.

Precautions Health and safety instructions

Conplast WL Xtra is non-toxic. Any splashes on skin should be washed well with water. If contact with eyes occurs, it shall be washed well with plenty of water and medical advice sought immediately.